Hardware purchase guide: What to buy for your laser show

Hardware purchase guide: What to buy for your laser show

Laser Mapping Kit for Resolume v1.2 icon

Hardware purchase guide

What to buy for your laser show.

You already have

Nothing to buy for these three.

Laser Mapping Kit for Resolume v1.2 icon

Laser Mapping Kit for Resolume v1.2

Visual to LaZzer, presets, installer and sample project.

Resolume Arena logo

Resolume Arena

Arena only. The kit does not work with Resolume Avenue.

A computer

The one you run Resolume Arena on.

You need

Three things. Pick one product from each group.

1

Laser DAC

The box between your computer and the laser. USB models plug straight in. Network models connect through an Ethernet cable.

Helios Laser DAC

USB · 1 laser

Helios Laser DAC

USB in, ILDA out, sold with an ILDA cable. The simplest way to start, from Bitlasers.

about$170

View product
HeliosPRO Laser DAC

Ethernet or USB

HeliosPRO Laser DAC

The Helios with a network port added, so it also works over Ethernet.

about$259

View product
Ether Dream 4

Ethernet

Ether Dream 4

High-performance network DAC from X-Laser. Backordered when checked.

about$229

View product
LaserCube

Complete laser · built-in DAC

LaserCube 1.2W WiFi

A small laser with its own DAC inside, so no separate DAC box is needed. Cheapest current LaserCube.

about$1,699

View product
IDN box

IDN · Ethernet to ILDA

IDN network box

Receives an IDN stream over Ethernet and outputs ILDA to the laser. Ask the supplier for the exact model.

priceon request

2

Animated laser projector with ILDA port

Any animated laser with an ILDA port works. Power runs from about 500 mW for rooms to 30, 40 and 50 W for large outdoor shows.

JUNMAN 1W RGB animation laser

1 W · RGB animation

JUNMAN 1W RGB animation laser

Full-colour animation beam laser for small rooms.

Amazon$265.99

View product
JUNMAN 5W RGB animation laser

5 W · RGB animation

JUNMAN 5W RGB animation laser

Full-colour animation laser for bigger rooms and stages.

Amazon$730.99

View product
Laserworld CS-1000RGB MK4

1 W · ILDA

Laserworld CS-1000RGB MK4

Full-colour show laser. Discontinued, so stock varies by shop.

about$480–520

View product

2 W · ILDA + DMX

Ibiza Scan2000RGB

Red 500 mW, green 500 mW, blue 1000 mW. ILDA through DB25, with a remote and safety key.

about$660

View product
Laserworld CS-3000RGB

3 W · ILDA

Laserworld CS-3000RGB

3 W total output, computer-controlled through ILDA. Sold out when checked.

about$850

View product

3 to 11 W · ILDA

Showtec Solaris series

Solaris 3.0 about $2,500, Solaris 5.5 about $6,500, Solaris 11.0 about $9,700, each with FB4 control.

from$2,500

View range

30 / 40 / 50 W

Outdoor animation lasers

Waterproof 30, 40 and 50 W RGB projectors from factory suppliers. Ask the supplier for a quote and confirm the ILDA port.

priceon request

View listing

3

Cables and converters

The ILDA cable carries the show from the DAC to the laser. Ethernet gear is only for network DACs.

GXMRHWY ILDA to network cable

DB25 to RJ45 · 30 cm

GXMRHWY ILDA to network cable

DB25 male to RJ45 female adapter cable for laser lights.

Amazon$13.99

View product
XANHAM DB25 shielded cable

DB25 cable · 5 m

XANHAM DB25 shielded cable

Double-shielded 25-pin straight-through cable, female to male.

Amazon$22.99

View product
Your Cable Store DB25 cable

DB25 cable · 50 ft

Your Cable Store DB25 cable

Long 25-pin male to female cable for a laser far from the computer.

Amazon$33.97

View product
BUSOHE Cat 8 Ethernet cable

Ethernet cable · Cat 8 · 30 ft

BUSOHE Cat 8 Ethernet cable

Flat, shielded, gold-plated plugs. For long runs to a network DAC.

Amazon$12.99

View product
UGREEN Cat 8 Ethernet cable

Ethernet cable · Cat 8 · 6 ft

UGREEN Cat 8 Ethernet cable

Braided and shielded. Short patch cable for a DAC next to the switch.

Amazon$6.99

View product
ILDA cable

ILDA cable · 2 m

ILDA cable, Bitlasers

Short DB25 cable for a DAC placed next to the laser.

about$15

View product
BeamZ ILDA cable 10 m

ILDA cable · 10 m

BeamZ ILDA cable, DB25

Male to female extension for a laser further from the computer.

about$35

View product

Ethernet cable

Cat6 Ethernet cable

Any Cat6 patch cable connects a network DAC to your switch or computer.

about$3–15

View product
TP-Link TL-SG105

Network switch

TP-Link TL-SG105

Five gigabit ports. Lets one computer talk to several network DACs.

about$13

View product

Ethernet to ILDA converter

HeliosPRO or Ether Dream 4

These two DACs already convert Ethernet to ILDA. Choose one from group 1 and no extra converter is needed.

from$219

See group 1

Easiest start: a Helios Laser DAC, a 2 m ILDA cable and one projector from group 2. No Ethernet gear is needed with a USB DAC.

My accountSupportTerms